The fiber reinforcement provides the structural performance required of the final part.  The fibers or filaments come in many chemical types and forms and are the primary contributor to the stiffness, strength and other properties of the composite.  The dominant chemical types of commercially available fibers are: fiberglass, aramid, carbon, polyester and vectran. Other fiber types may be suitable for special applications. The dominant forms that fibers are sold include: Strands (or roving or tow or yarn. Many fibers or filaments stranded together in a bundle, wound in a spool or reel,) woven fabrics (flattened strands of filaments woven in a variety of weaves to a type of fabric or cloth,) unidirectional (strands laid side by side and stitched or held together by other means, forming a kind of fabric that bares reinforcement only in the fill direction,) multiaxials (unidirectional woven fabrics stitched together in a combination of orientations,) and chopped strand mat (chopped strands held together with some kind of glue or “binder” in the form of a non-woven fabric.) All fibers designated for use in composites undergo chemical treatments and are coated with some kind of “sizing”. Sizing is a chemical that binds the filaments together, reduces abrasion, facilitates impregnation and acts like a coupling agent that enhances compatibility with one or more types of resin.

Selection of reinforcement type greatly influences costs. This is not only because of the quality and cost of the material itself, but also because higher cost material usually requires highly skilled personnel, more sophisticated production facilities and often more labour hours.



Fiberglass was first discovered in 1893 and was firstly made commercially available in 1936 as insulation material. It became popular in the 1950’s, when some of the health hazards associated with asbestos were becoming apparent. Due to the similarity in shape between the fiberglass and the asbestos fibers, fiberglass was able to effectively replace asbestos in many applications such as electrical, thermal, and acoustic insulation and structural reinforcement. Today it is the dominant reinforcement fiber in composite construction, accounting for over 90% of worldwide consumption. This is simply because it has good strength to weight characteristics, can be processed easily and sells at a low price. Glass filaments are made relatively easily by extruding molten glass. The diameters of the fibers produced range from 5 to 25 microns. Many different types and qualities of glass sell for significantly different cost. The most widespread quality is “E-glass”, “E” from the word Electric implies that it is an electrical insulator. It is low cost product, used mostly in the marine industry. Others are “S glass” and “S2 glass”, the letter “S” comes from the word Strength implying that it has improved mechanical properties. These types are much more expensive and used mostly in armor applications. “S” is certified as for the production parameters. “AR glass” is resistant to alkali chemical attack. “C” or “T Glass” is resistant to acid and Corrosion. “A glass” is glass with more alkali content similar to window glass, and costs a bit less. Generally, when cost is a major driving force in the selection of a reinforcing material, fiberglass is usually preferred.



Aramid was invented by DuPont in 1960’s (“Kevlar” is the registered trade name of  Dupont aramid) as a result of research on nylon (polyamide) fibers. It was firstly introduced in the market in the 1970’s as tire reinforcement and like fiberglass, as an asbestos substitute. The chemical structure of aramid shows the aromatic benzene rings along the polymeric backbone. The word aramid is a contraction of its chemical description–aromatic polyamides. Strength and modulus of aramid are very good, density very low, UV resistance low and compression and shear strength are similar to E glass. Its value comes from excellent toughness and resistance to impact, damage, abrasion and heat (up to 500o C.) 

The superior toughness of aramid is an outcome of the energy consuming failure mechanism of its fibers. This energy absorbing failure mechanism makes it ideal for use in armor, military and ballistic applications, like helmets and bullet-proof vests. Among many other very important uses, it used for firefighting protection, on the underside of airplanes (protection against stone hits during take off and landing) and the under side of race cars. It is used generally in important structures whenever impact, abrasion and/or heat is anticipated. It also blends very well and works together with other fibers, like glass and carbon. Carbon-aramid “hybrid” constructions bare the high strength and stiffness of carbon and the impact protection of aramid. Processing aramid in composite fabrication is somewhat more difficult than fiberglass and carbon. Toughness makes fabrics difficult to cut with conventional methods. Fiber wetout is more difficult that fiberglass and carbon. Orthophthalic polyester resin will not adhere well to aramid (isophthalic polyester is much better). Post fabricating aramid components, e.g. trimming off the edges is also difficult. Quality cutting tools are recommended.


High modulus polyester (HMP Tendor)

HMP Tendor is a high strength diolen fiber. It has been used in industrial applications for many decades, in a wide field of applications like tire reinforcement, safety belts, ropes and nets. Recognition of its value in composite applications for aerospace, defense, marine and transportation has come in the late years. It is used both as primary reinforcement and in hybrid arrangements with fiberglass and aramid. Toughness makes it ideal for use on the outside layers of composite construction for impact protection. Placed on the outside layers it also protects aramid and glass from moisture (and blistering) and being smooth, it reduces print-through. At the same time, its very low density also make it ideal for use in the middle layers, where working as a core material, it adds stiffness to the structure. Other attractive features include good impact and fatigue resistance, and potential for vibration damping. Generally, properties of Tendor resemble the properties of aramid at lower level, but its reasonable price and reliability make it attractive. Tendor performance at elevated temperature falls off. It should not be used in above 200o F applications. Processing is easier than this of aramid, but not as easy as fiberglass and carbon.



Carbon has the highest strength and highest price of all reinforcement fibers used in composites today. It was invented in the UK in early 1960s at the Royal Aircraft Establishment at Farnborough, Hampshire. The most common method of making carbon fiber is the oxidation and thermal pyrolysis of an organic precursor, polyacrylonitrile (a polymer fiber based on acrylonitrile.) When heated in the correct conditions, the non-carbon constituents evaporate away. The resulting fiber is 93–95% carbon. Instead of PAN as a precursor, carbon fiber can also be manufactured from pitch or rayon. The size, or thickness of Carbon tows is measured in “k” or thousands of filaments. A 3k tow has 3,000 filaments and a 12k has 12,000. Carbon fibers exhibit: substantially better strength and stiffness values than all the others, outstanding temperature performance, high electrical and low thermal conductivity. Impact or damage tolerance of pure carbon composite products can be from relatively low to very poor, and greatly depends on processing method. Despite that, when weight on a composite product is important, carbon fiber is the reinforcement to use.



Vectran is the outcome of 30 years research on liquid crystal polymer (LCP) fibers. 100% of world production is now owned by one company, Kuraray Co., Ltd. Annual production is only 600 tons in 2007, but is growing at a rate of about 10% a year. This fiber is formed by melt extrusion of LCP through fine diameter capillaries. It is used in aerospace composites and many other high value industry applications. It exhibits high strength and modulus, excellent creep resistance, high abrasion resistance, excellent flex/fold characteristics, minimal moisture absorption, excellent chemical resistance, high dielectric strength, outstanding cut resistance, high impact resistance, outstanding vibration damping characteristics, very good property retention at high/low temperatures (melting point of 330 °C, with progressive strength loss from 220 °C.) They have gold color, similar to aramid, but are usually painted in other colors for cosmetic purposes. Vectran also adheres to resins better than aramid. Among others, it should be used in applications where weight and impact resistance are important.


About composites

home, about composites, benefits of composites, manufacturing techniques, markets served, types of resin systems, types of fiber reinforcement, yarn/tow nomenclature, weaving styles

Core materials

Markets served

Manufacturing techniques

Types of resin systems

Types of fiber reinforcement

Yarn/tow nomenclature

Weaving styles


Fibermax Composites company logoFibermax Composites company logoFibermax Composites company logoFibermax Composites company logoFibermax Composites company logoFibermax Composites company logoFibermax Composites company logoFibermaxs Composites company logoFibermax Composites company logoFibermax Composites company logo